Categories:
- AC Line Cord, Vintage Wires
- Adhesive/Tie Wrap And Cable Clamps
- Insulated Tape
- Battery Holder
- Capacitors
- Chassis Mounting Hardware
- Decals
- Dial Cords and Belts
- Dial Lamp Bulbs and Holders
- Dial Pointers
- Dial Scales
- Electrolytics
- Fahnestock Clips
- Felt Knob Washers
- Fuses and Fuse Holders
- Grille Cloth
- Hardware
- Heat Shrink Tubing and Fiberglass Insulation
- Hex Socket Set Screws
- Jack Plugs Pins and Spades
- Knobs
- Lubricants and Cleaners
- Miscellaneous and Discounted Items
- Phono and Tape Recorder Drives
- Plastic Dials
- Power Plugs
- Radio Antennas and Parts
- Radios and Equipment for Sale
- Record Changer Spindles, Adapters, Cartridges and Needles
- Resistors
- Schematics
- Solder Wire and Soldering Tools
- Speakers
- Stock Knobs, Plastic
- Strain Relief Clamps
- Switches, Volume Controls, and Volume Control Base Items
- Terminal Strips and Solder Lugs
- Test Meters and Cables
- Tools
- Transformers
- Transistors, Diodes and Accesssories
- Used Name Plates
- Vacuum Tubes and Accessories
Product successfully added to your cart. View Cart
-
Type 32 4-pin screen-grid tetrode tube with top cap for vintage battery-operated radio receiver circuits. Available in new and used condition.
32 Vacuum Tube New and Used
$8.00Successfully Added to your Shopping CartAdding to Cart... -
Type 41 / 41TUB power output pentode vacuum tube for vintage radio receivers, featuring a 6.3V heater and 6-pin base.
41TUB Vacuum Tube New and Used
$8.00Successfully Added to your Shopping CartAdding to Cart... -
6AN8 triode-pentode vacuum tube for television receiver stages and hi-fi audio driver/phase inverter circuits, featuring a 6.3V heater and 9-pin miniature base.
6AN8 Vacuum Tube New and Used
$8.00Successfully Added to your Shopping CartAdding to Cart... -
6BJ7 triple diode vacuum tube for television signal detection, AGC, and DC restoration stages, featuring a 6.3V heater and 9-pin miniature base.
6BJ7 Vacuum Tube New and Used
$8.00Successfully Added to your Shopping CartAdding to Cart... -
6BG6 beam power pentode vacuum tube for TV horizontal deflection and high-power audio amplifier output stages, featuring a 6.3V heater, top plate cap, and 8-pin octal base.
6BG6 Vacuum Tube New and Used
$8.00Successfully Added to your Shopping CartAdding to Cart... -
6GB5 / EL500 beam power pentode tube with top plate cap, 6.3V heater, and 9-pin base.
6GB5 Vacuum Tube New and Used
$8.00Successfully Added to your Shopping CartAdding to Cart... -
8-pin octal saddle-mount and 8-pin subminiature chassis vacuum tube sockets with solder lugs.
8 Pin Tube Socket 01, 02
$8.00Successfully Added to your Shopping CartAdding to Cart... -
Beam power amplifier 7C5 loctal vacuum tube with a 6.3V heater rating, available in new old stock (NOS) or tested used options for vintage radio repair and audio power output circuits.
7C5 Vacuum Tube New and Used
$8.25Successfully Added to your Shopping CartAdding to Cart... -
Medium-mu twin triode 7F8 loctal vacuum tube with a 6.3V heater rating, available in new old stock (NOS) or tested used options for vintage radio repair, VHF RF amplifiers, and oscillator circuits.
7F8 Vacuum Tube New and Used
$8.25Successfully Added to your Shopping CartAdding to Cart... -
60 uf x 40 uf x 40 uf 160V / 20 uf 25V four-section electrolytic capacitor. Combines four capacitor sections into a single body for multi-stage power supply applications and electronic repairs.
Four Section Electrolytic 60uf/40uf/40uf 160v, 20uf 25v
$8.50Successfully Added to your Shopping CartAdding to Cart... -
Dark brown wood control knob with raised outer top ring and two-ring grip. Available in four sizes ranging from 3/4" to 1 5/32" diameter for round set-screw shafts.
Wooden Knob 10069
$8.50Successfully Added to your Shopping CartAdding to Cart... -
Dark brown bakelite control knob with scalloped edge detail, 1 1/8" diameter x 9/16" height, fits 1/4" round shaft with set screw (1/2" socket depth).
Bakelite Knob 110549
$8.50OUT OF STOCKSuccessfully Added to your Shopping CartAdding to Cart... -
Dark brown Emerson "Mae West" Art Deco radio knob. Available in 23/32" (3/8" socket depth) and 61/64" (35/64" socket depth) sizes for 13/64" half-round shafts.
Bakelite Knob 123440
$8.50Successfully Added to your Shopping CartAdding to Cart... -
Dark brown octagonal bakelite control knob with brass-lined socket. Available in 5/8" (5/32" shaft) and 1 1/4" (9/64" shaft with set screw) sizes.
Bakelite Knob 124122
$8.50Successfully Added to your Shopping CartAdding to Cart... -
Dark brown Emerson bakelite control knob, 1 3/64" diameter x 5/8" height, fits 1/4" round shaft with set screw (1/2" socket depth).
Bakelite Knob 124432
$8.50Successfully Added to your Shopping CartAdding to Cart... -
Dark brown bakelite control knob with three groups of three lines detail, 3/4" diameter x 7/16" height, fits 13/64" half-round shaft (3/8" socket depth).
Bakelite Knob 134948
$8.50Successfully Added to your Shopping CartAdding to Cart... -
Molded bakelite control knob featuring an indicator line detail. Available in brown and black for 13/16" half-round shafts with internal spring clip attachment (1/2" socket depth).
Bakelite Knob 331359
$8.50Successfully Added to your Shopping CartAdding to Cart... -
Mottled medium brown bakelite control knob with indicator and two groups of three lines detail, 59/64" diameter x 5/8" height, fits 1/4" round shaft with set screw (1/2" socket depth).
Bakelite Knob 331520
$8.50Successfully Added to your Shopping CartAdding to Cart... -
Scalloped edge bakelite control knob, 7/8" diameter x 1/2" height. Available in dark brown and black in plain, indicator dot, VOLUME, VOL. OFF, TONE, and SW. BC. PH. options.
Bakelite Knob 331920
$8.50Successfully Added to your Shopping CartAdding to Cart... -
Bakelite control knob with four raised lines detail. Offered in 3/4" and 7/8" sizes (dark brown, black) across half-round spring, set-screw, and ribbed shaft configurations.
Bakelite Knob 333404
$8.50Successfully Added to your Shopping CartAdding to Cart... -
Dark brown bakelite control knob with fleur-de-lis design on top. Available in 1 1/8" (3/8" socket depth) and 1 3/8" (1/2" socket depth) diameters for 1/4" round shafts with set screw.
Bakelite Knob 334250
$8.50Successfully Added to your Shopping CartAdding to Cart... -
Bakelite control knob with parallel top slashes detail. Available in 15/16" dark brown (1/4" ribbed shaft) and 1 1/8" mottled brown (1/4" half-round spring shaft).
Bakelite Knobs 340143
$8.50Successfully Added to your Shopping CartAdding to Cart... -
Dark brown bakelite control knob with central circle and radiating lines detail, 7/8" diameter x 15/32" height, fits 1/4" round shaft with set screw (13/32" socket depth).
Bakelite Knob 340320
$8.50Successfully Added to your Shopping CartAdding to Cart... -
Dark brown bakelite control knob with scalloped edge detail, 1" diameter x 5/8" height, fits 13/64" half-round shaft with spring clip (1/2" socket depth).
Bakelite Knob 340928
$8.50Successfully Added to your Shopping CartAdding to Cart... -
Dark brown bakelite control knob with 1/8" skirt and four groups of four vertical lines, 1" diameter x 3/4" height, fits 1/4" three-quarter round shaft (11/16" socket depth).
Bakelite Knob 342831
$8.50Successfully Added to your Shopping CartAdding to Cart... -
Dark brown bakelite control knob with six raised lines detail. Available in 3/4" (9/16" socket depth) and 15/16" (5/8" socket depth) diameters for 1/4" half-round shafts with spring clip.
Bakelite Knob 343220
$8.50Successfully Added to your Shopping CartAdding to Cart... -
Bakelite control knob with four curved lines detail, 13/16" diameter x 7/16" height. Available in black and brown with or without indicator pointer for 1/4" round set-screw shafts (5/16" socket depth).
Bakelite Knob 343622
$8.50Successfully Added to your Shopping CartAdding to Cart... -
Mottled dark brown bakelite control knob. Available in 15/16" diameter (1/4" round set-screw shaft) and 1" diameter (1/4" half-round spring shaft).
Bakelite Knob 344159
$8.50Successfully Added to your Shopping CartAdding to Cart... -
Black plastic pointer knob with red face and set screw for 1/4" round shafts.
Newer Knob 031105
$8.50Successfully Added to your Shopping CartAdding to Cart... -
Black plastic pointer knob with knurled edges, white indicator line, and set screw for 1/4" round shafts.
Newer Knob 032430
$8.50Successfully Added to your Shopping CartAdding to Cart... -
Marine blue plastic control knob, 1 1/8 inch diameter, fits 1/4 inch rib round shaft.
Plastic Knob 112155
$8.50Successfully Added to your Shopping CartAdding to Cart... -
Forest green plastic control knob, 1 7/64 inch diameter, fits 1/4 inch rib round shaft.
Plastic Knob 121013
$8.50Successfully Added to your Shopping CartAdding to Cart... -
Dark brown plastic control knob with scalloped edge, 1 inch diameter, fits 1/4 inch half-round shaft with spring.
Plastic Knob 122957
$8.50Successfully Added to your Shopping CartAdding to Cart... -
Plastic control knob with three parallel lines detail, medium brown or dark brown, 1 7/32 inch diameter, fits 1/4 inch rib round shaft.
Plastic Knob 123121
$8.50Successfully Added to your Shopping CartAdding to Cart... -
Plastic control knob with metallic gold center, medium brown or dark brown, 1 5/16 inch diameter, fits 1/4 inch half-round shaft with spring.
Plastic Knob 123251
$8.50Successfully Added to your Shopping CartAdding to Cart... -
Brown and black plastic control knobs with eight-spoke wheel detail, 45/64 inch and 59/64 inch diameters, fit 1/4 inch round shaft with set screw.
Plastic Knob 123655
$8.50Successfully Added to your Shopping CartAdding to Cart... -
Dark brown plastic control knob with indicator line, 1 11/64 inch diameter, fits 1/4 inch half-round shaft with spring.
Plastic Knob 303100
$8.50Successfully Added to your Shopping CartAdding to Cart... -
Dark brown plastic control knob with indicator hole, 1 57/64 inch diameter, fits 1/4 inch half-round shaft with spring.
Plastic Knob 303137
$8.50Successfully Added to your Shopping CartAdding to Cart... -
Dark brown plastic control knob, 1 1/2 inch diameter, fits 13/64 inch half-round shaft with spring.
Plastic Knob 304421
$8.50Successfully Added to your Shopping CartAdding to Cart... -
Light brown and medium brown plastic control knobs, 1 1/16 inch diameter, fit 1/4 inch half-round shaft with spring.
Plastic Knob 331245
$8.50Successfully Added to your Shopping CartAdding to Cart... -
Dark brown plastic control knobs with glossy metallic gold centers and indicator lines, 13/16 inch and 1 7/32 inch diameters, fit half-round shafts with springs.
Plastic Knob 333840
$8.50Successfully Added to your Shopping CartAdding to Cart... -
Black plastic pointer control knobs, 13/16 inch and 1 7/16 inch length options, fit 1/4 inch round shaft with set screw.
Plastic Knob 333946
$8.50Successfully Added to your Shopping CartAdding to Cart... -
Dark brown plastic control knob, 1 inch diameter, fits 1/4 inch half-round shaft with spring.
Plastic Knob 334224
$8.50Successfully Added to your Shopping CartAdding to Cart... -
Dark brown plastic control knob with indicator arrow, 1 inch diameter, fits 1/4 inch round shaft with set screw.
Plastic Knob 341113
$8.50Successfully Added to your Shopping CartAdding to Cart... -
Dark brown control knob with indicator dot on rim, 1 5/16 inch diameter, fits 1/4 inch half-round shaft.
Plastic Knob 343517
$8.50Successfully Added to your Shopping CartAdding to Cart... -
Type 1H4G octal 8-pin low-mu triode tube for vintage 2-volt battery radio circuits. Available in new and used condition.
1H4G Vacuum Tube New and Used
$8.50Successfully Added to your Shopping CartAdding to Cart... -
Centralab CRL 1462 2-pole 2-position shorting volume control switch with 1/4" round shaft.
CRL 1462 2-Pole 2-Position Shorting Rotary Selecter Switch
$8.50Successfully Added to your Shopping CartAdding to Cart... -
Package of 4 rubber chassis mount washers measuring 7/8" in outer diameter and 3/8" in thickness, used for electronic chassis mounting and hardware isolation.
Chassis Rubber Mount 260135
$9.00Successfully Added to your Shopping CartAdding to Cart... -
Package of 4 rubber chassis mount washers measuring 7/8" in outer diameter and 1/8" in thickness, used for electronic chassis mounting and hardware isolation.
Chassis Rubber Mount 260243
$9.00Successfully Added to your Shopping CartAdding to Cart... -
Package of 4 rubber chassis mount washers measuring 1 1/4" in outer diameter and 3/8" in thickness, used for electronic chassis mounting and hardware isolation.
Chassis Rubber Mount 260371
$9.00Successfully Added to your Shopping CartAdding to Cart...









































